Desk microphone Adonis AM-508E

 

Adonis AM-508E

*High-quality Compressor Amp. built-in.
Capable of sending our constant voice level regardless of voice, whispering, loud, etc.
*Provided with High-sensitivity Electret Condenser Microphone.
The Electret Condenser Microphone ensure the better voice quality.
*Provided with FM/SSB Audio Quality Selector Switch.
*Provided with Electronic Switches.
*Usable with microphone cable equipped with power feeding line ( ”D” series cables).
*Connectable with every transceiver available in the market by the conversion cables ( microphone interconnecting cables ) optionally available.

AM-508E
*Microphone : Electret Condenser Microphone
*IC : 1 piece
*Transceiver : 16 pieces
*Diode : 6 pieces
*Output Voltage : 0 – 30 mV ( RMS )
*Output Impedance : 500 – 100K ohms
*Compressor Level : 45dB ( HIGH ) 10dB ( LOW )
*Power Voltage : DC 3 V ( UM3 x 2 )
*Power Consumption : 2mA ( RX ) 3mA ( TX )

Kenwood MC 60A

The Kenwood MC-60A has been a popular desk mic among Kenwood owners for many years. It has a communication type dynamic unidirectional moving coil type mic element. It features UP-DOWN tuning (on compatible Kenwood transceivers) plus a built-in pre-amp. There is a switch for PTT (push to talk) and also a lock feature. The mic impedance may be set for 50K ohms or 500 ohms. The frequency response is 150 Hz to 10 kHz (-6dB) with the Preamp off and 200 Hz to 7 kHz (-6 dB) with the Preamp on. The heavy zinc die-cast base provides extra stability. The mic terminates to a standard 8 pin mic plug. The preamp requires two AA cells which are mounted through the bottom of the base. Please note that on some later Kenwood models, such as the TS-2000, it is better to not to use the preamp function (leave switched 'off' and do not install AA cells). Please note that the earlier MC-60 (non-"A") version featured a 4 pin mic plug and did not have UP-DOWN tuning.
The optional Kenwood MJ-88 8 Pin to Modular Adapter will allow this mic to be used on such models as the TM-261A, TM-271A, TM-742, TMD-700A, TM-G707A, TM-V7A andTMV-708.

Adonis AM 708E

 

Features, Functions, Specifications:
-Microphone : High Sensitivity Electret Condenser Mic.
-IC : 2 pieces
-Transistor : 20 pieces
-Diode : 13 pieces
-Compressor Level : HIGH : 45dB LOW : 35dB
-Output Voltage : COMP : 0 – 30 mV ( RMS ) MANUAL : 0 – 70 mV ( RMS )
-Matching Output Impedance : 500 ohms – 100k ohms
-Power Voltage : Battery : DC 3 V ( UM3 x 2 pieces )Not included
Mic. Cable D series : DC 5 – 9 V
-Current Consumption : at Receiving : 3 mA, Transmitting : 6 mA ( approx )
-Alarm sound : approx. 4.5KHz Intermittent Tone
-Flexible ( Gooseneck ) Pipe : ? 8mm, ( Length : 150mm )
-External Size : 182 (W) x 130 (D) x 322 (H) mm
-Weight : approx 750 g ( Not included dry battery

Adonis AM 508E

*High-quality Compressor Amp. built-in.
Capable of sending our constant voice level regardless of voice, whispering, loud, etc.
*Provided with High-sensitivity Electret Condenser Microphone.
The Electret Condenser Microphone ensure the better voice quality.
*Provided with FM/SSB Audio Quality Selector Switch.
*Provided with Electronic Switches.
*Usable with microphone cable equipped with power feeding line ( ”D” series cables).
*Connectable with every transceiver available in the market by the conversion cables ( microphone interconnecting cables ) optionally available.

Icom SM 50 Desk Microphone

SM-50

 

 

 

The Icom SM-50 is a unidirectional, dynamic microphone designed for base station operation with select Icom transceivers. (It cannot be used with non-Icom transceivers since the power is supplied from the connected transceiver). The SM-50 features Up-Down tuning (on compatible ICOM transceivers). There is a switch for PTT (push to talk) and also a lock feature. There is also a Low Cut Switch on the top of the base to cut out the low frequency components on input voice signals.

On the bottom of the mic base there is a gain adjustment. This mic is powered from the Icom transceiver. The mic cables terminate to a standard Icom 8 pin mic plug. This mic works with several Icom transceivers including the IC-7600.

Specifications
Microphone Element: Dynamic
Sensitivity: -30 dB ± 4dB (1 kHz, 0 dB = 1 V/1 Pa)
Impedance: 55 Ohms ± 30% (at 1 kHz)
Power requirement: 5-10 VDC (supplied from radio)
Weight: 26 oz. (730g).
Cable length: 39 inches (1m)