Radio HF YAESU FT-450

Radio HF YAESU FT 450
Radio HF YAESU FT-450 Specifications GENERAL Frequency Range: Receive: 30 kHz to 56 MHz Transmit: 160 – 6 Meters Emission Modes: A1A (CW), A3E (AM), J3E (LSB/USB), 0 F3 (FM) Synthesizer Steps (Min.): 10 Hz (CW/SSB), 100 Hz (AM/FM), Antenna Impedance: 50 Ohm, Unbalanced Operating Temp. Range: -10 C to +50 C (14 F to 122 F) Frequency Stability: Better than 1 ppm/hour (at 77 F after warmup) 0 Power Requirements: DC 13.8V 10 %, Negative Ground Current Consumption: Receive (Squelched): 0.55A, 0 Receive (Max. Audio): 1.5A 0 Transmit: 22A (@ 100W RF output)

 

 

Alinco DX-SR8

Alinco DX-SR8 mencakup 160 sampai 10 meter di SSB, CW, AM dan FM. Pemancar memberikan 100 Watt kuat di SSB, CW dan FM (40 Watt pada AM). Dan tiga tingkat daya dapat dipilih: 100 Watt, 10 Watt dan pengaturan QRP variabel 0,1 ~ 2 Watt. Receiver mengukur jangkauan umum dari 30 kHz menjadi 35 MHz. Fitur lainnya termasuk: JIKA shift, pemindaian 600 memori, band dan memori, attenuator, preamp, RIT, XIT dan noise blanker. Konektor panel belakang untuk perangkat eksternal. Ukuran: 9,45 x 3,95 x 11,54 inci (240x100x293mm) 9 lbs.

The Alinco DX-SR8T covers 160 to 10 meters in SSB, CW, AM and FM. The transmitter delivers a powerful 100 Watts in SSB, CW and FM (40 Watts on AM). And three power levels may be selected: 100 Watts, 10 Watts and a variable QRP setting of 0.1 ~ 2 Watts. The receiver tunes general coverage from 30 kHz to 35 MHz. Other features include:  IF shift, 600 memories, band and memory scanning, attenuator, preamp, RIT, XIT and noise blanker. Rear panel connectors for external devices. Size:  9.45 x 3.95 x 11.54 inches (240x100x293mm) 9 lbs.

harga Call 0811125787

Alinco DX-SR8 alinco dx-sr8 hf transceiver

Alinco DX-SR8
Alinco DX-SR8 covers 160 to 10 meters in SSB, CW, AM and FM.

Alinco DX-SR8 covers 160 to 10 meters in SSB, CW, AM and FM. The transmitter delivers a powerful 100 watts in SSB, CW and FM (40 watts on AM). And three power levels may be selected: 100 watts, 10 watts and a variable QRP setting of 0.1 ~ 2 Watts. The receiver tunes general coverage from 30 kHz to 35 MHz. Other features include:  IF shift, 600 memories, band and memory scanning, attenuator, preamp, RIT, XIT and noise blanker.

Icom IC-7200

Icom IC-7200
Icom IC-7200
Icom IC-7200
Icom IC-7200

Specifications
General
Frequency coverage*1
U.S.A. Version
RX
TX

0.030– 60.000 MHz*2
1.800– 1.999 MHz
3.500– 3.999 MHz
5.3305, 5.3465, 5.3665, 5.3715, 5.4035 MHz*3
7.000– 7.300 MHz
10.100–10.150 MHz
14.000– 14.350 MHz
18.068–18.168 MHz
21.000– 21.450 MHz
24.890–24.990 MHz
28.000– 29.700 MHz
50.000–54.000 MHz
*1 Frequency ranges vary depending on version.
*2 Guaranteed range: 0.5–29.7 and 50–54.000 MHz..
*3 USB only
Mode USB, LSB, CW, RTTY (FSK), AM
Number of channels 201 Ch. (199 regular, 2 scan edges)
Antenna connector SO-239 (50?)
Power supply requirement: 13.8V DC ±15% (negative ground)
Operating Temperature range -10°C to +60°C; +14°F to +140°F
Frequency stability
Less than ±0.5ppm
Frequency resolution 1Hz
Power consumption Tx Max. power: 22.0A
Max. audio: 2.0A
Rx Stand-by: 1.3A
Dimensions
(projections not included) 241 W × 84 H × 281 D mm;
9 1?2 x 3 5?16 x 11 1?16 in.
Weight (approx.) 5.5kg; 12.1 lb
Transmitter
Output power
SSB, CW, RTTY
AM

2–100W
1-25W*
*Carrier power.
Modulation system
SSB
AM

Digital PSN modulation
Digital low power modulation
Spurious emission
(unwanted emission) Less than -50dB (HF bands)
Less than -63dB (50 MHz band)
Carrier suppression More than 50dB
Unwanted sideband More than 50dB
Microphone connector 8-pin connector (600?)
Receiver
Receive system Triple conversion super-heterodyne
Intermediate frequencies

64.455 MHz
455 MHz
15.625 kHz
Sensitivity (10dB S/N, Preamp ON, Filter shape sharp)
SSB, CW

AM

Less than 0.16µV (1.8-29.7 MHz)
Less than 0.13µV (50 MHz band)

Less than 13µV (0.5-1.799 MHz)
Less than 2µV (1.8-29.7 MHz)
Less than 1µV (50 MHz band)
Squelch sensitivity (Pre-amp: ON)
SSB, Threshold
Less than 5.6?V
Selectivity
SSB (BW: 2.4kHz sharp)

CW (BW: 500Hz sharp)

RTTY (BW: 350kHz)

AM (BW: 6kHz)

More than 2.4 kHz/–6dB
Less than 3.6 kHz/–60dB
More than 500 Hz/–6dB
Less than 900 Hz/–60dB
More than 360 Hz/–6dB
Less than 650 Hz/–60dB
More than 6.0 kHz/–6dB
Less than 15.0 kHz/–60dB
Spurious and image rejection ratio More than 70dB (except 1/2 IF through on 50 MHz band)
Audio output power (at 13.8V DC) More than 2.0W at 10% distortion with an 8? load
RIT variable range ±9.999 kHz
EXT SP connector 2-connector 3.5 (d) mm (1?8?)/8?
All stated specifications are subject to change without notice or obligation.

Alinco DX-SR8

Alinco DX-SR8
Alinco DX-SR8 covers 160 to 10 meters in SSB, CW, AM and FM.

Alinco DX-SR8 covers 160 to 10 meters in SSB, CW, AM and FM. The transmitter delivers a powerful 100 watts in SSB, CW and FM (40 watts on AM). And three power levels may be selected: 100 watts, 10 watts and a variable QRP setting of 0.1 ~ 2 Watts. The receiver tunes general coverage from 30 kHz to 35 MHz. Other features include:  IF shift, 600 memories, band and memory scanning, attenuator, preamp, RIT, XIT and noise blanker.

Yaesu FT-450

Yaesu FT-450
Yaesu FT-450 provides world class performance in an easy to use, compact package. It employs state of the art IF DSP technology to bring an array of advanced features to the operator. Transmit frequency coverage includes 160 to 6 meters. 1.8/2.4/3.0 kHz.

Yaesu FT-450 provides world class performance in an easy to use, compact package. It employs state of the art IF DSP technology to bring an array of advanced features to the operator. Transmit frequency coverage includes 160 to 6 meters. 1.8/2.4/3.0 kHz.

*400 MHz built-in IF DSP
*Built-in Electronic Keyer
*LCD Multi-function Display.
*Bar-Graph Metering
*Built-in TCXO ± 1 PPM/hour (after warmup)
*AGC Fast-Slow-Auto-Off Selection.
*Clarifier adjustment
*Dedicated Data Jack for FSK-RTTY
*CTCSS
*User functions configurable by menu
*Digital voice announcement of frequency, mode and S-meter
*500 Regular Memories and Two voice memories
*CW Beacon function
*10 kHz Roofing Filter