RIG Yaesu FT-2900R

Yaesu FT-2900

Frequency Range
136-174 MHz.
Channel Steps 5/1/100 kHz
Standard Repeater Shift 600 kHz
Modes of Emission F2D, F3E
Antenna Impedance 50 Ohms, Unbalanced
Frequency Stability Better than 10ppm @ -20C to +60C
Operating Temperature Range -20C to +60C
Supply Voltage 13.8 VDC (15%), negative ground
Current Consumption (typical) RX: less than 0.7A, less than 0.3A (Squelched)
TX: 15A (75w), 9A (30W), 5A (10W), 4A (5W)
Case Size (W x H x D, mm) 160 x 50 x 185 (w/o knobs)
Weight (approx.) 1.9 kg

TRANSMITTER

Output Power 5/10/30/75 W
Modulation Type Variable Reactance
Maximum Deviation 5 kHz (Wide 2.5 kHz (Narrow)
Spurious Radiation Better than -60dB
Microphone Impedance 2k

RECEIVER

Circuit Type Double-Conversion Superheterodyne
Intermediate Frequencies 21.7 MHz & 450 kHz
Sensitivity (for 12dB SINAD) Better than 0.4 V
Selectivity (-6db / -60dB) 12 kHz / 28 kHz (Wide) 9 kHz / 22 kHz (Narrow)
IF Rejection Better than 70dB
Image Rejection Better than 70dB
Maximum AF Output 3W into 4Ohms @ 10% THD

jual icom v8000

144MHz

The supplied HM-133V remote control mic controls everything in the palm of your hand. Icom’s exclusive Hot Keys lets you program the features that you use the most. The bigger backlit keys allow you to operate in low light conditions. This radio is supplied with: HM-133V remote hand mic, OPC-1132 DC power cable, V8000 MMB mobile mounting bracket, spare fuses and mic clip.
Features
Scanning
DTMF Encode (Decode optional)
200 Alpha Memories
One Piece die-cast chassis
10 dB Squelch Attenuator
Weather Alert and Weather Scan
75 Watts Output
DCS Encode/Decode
CTCSS Encode/Decode
Remote Backlit Hand Mic

Icom IC-V8000
Icom IC-V8000

Jual RIG ALINCO DR-135 MK3

ALINCO DR-135 MK3
ALINCO DR-135 MK3
Specifications.
GENERAL
Frequency range
TX: 136-173.995 MHz
RX: 118-135.995 MHz (AM)
173.995 MHz
Detail Produk:
Operating mode 16K0F3E (FM)/8K50F3E (Narrow-FM)
F1, F2, F3
Frequency resolution 5, 8.33, 10, 12.5, 15, 20, 25, 30, 50 kHz
Memory channel 100 channels + 1 call channel
Ant. impedance 50 ohm unbalanced
Frequency stability ± 5 ppm
Microphone impedance 2K ohm
Rated voltage 13.8 VDC ± 15% (11.7-15.8V)
Current Transmit: approx. 11.0 A
Receive: approx. 600 mA (Max) 400 mA (Squelched)
Operating temperature -10°C to +60°C (+14°F to +140°F)
Ground Negative ground
Dimensions 142(W) x 40(H) x 174(D) mm
5.58″(W) x 1.57″(H) x 6.83″(D)
Weight Approx. 1.0 Kg (35.3 oz)
TRANSMITTER
Power Output 50 Watts (HI)
10 Watts (MID)
5 Watts (LOW)
Modulation variable reactance
Spurious Emission -60 dB or le

Kenwood TM 281A

Frequency Coverage  VHF TX/RX  136.000 – 173.995 Mhz
Type of emissions  F3E (FM)
No. of memory Ch.  200
Operating Temperature -10OC ~ +60OC
Frequency stability  + 3 ppm  at 25OC
Operating Voltage  13.8V DC + 15%
Current drain (at 13.8 V DC) Tx            high (65 W)          14A typical
Rx            Max audio             1A typical
Antenna Impedance  50 Ω (SO-239)
Alphanumeric LCD display
Frequency name tag
Built-in CTCSS and DTS encoder/decoder
TRANSMITTER
Output power  Hi:65W/Lo:25W
Modulation  Variable reactance modulation
Max. freq. devition  +5.0Khz(wide)/+2.5Khz(narrow)
Modulation distortion  < 3% (300 Hz- 3 Khz)
Microphone impedance  600Ω(8-pin modular)
RECEIVER
Intermediate Freq.  49.95Mhz/450Khz
Sensitivity  Less than 0.18 µV (at 12db SINAND)
Squelch sensitivity  0.1 µV typical (threshold)
Selectivity  Wide > 12Khz (at- 6dB), < 30 Khz (-60 dB)
Spurious and image  More than 60dB
Audio output power  2W typ. (5% distortion )

Kenwood TM 281A
Kenwood TM 281A