Yaesu FT-857D

The Yaesu FT-857D is the worlds’s smallest HF/VHF/UHF multimode amateur transceiver. It is the sucessor to the earlier FT-857. But the new D version adds the 60 meter ham band and includes the formerly optional DSP-2 Digital Signal Processing Unit. The FT-857D is loaded with features, high power output and a receiver that blends the renowned performance of the FT-897D and FT-1000 Mark V. It provides coverage of the 160 to 6 meter bands plus the 144 MHz and 430 MHz bands! The ergonomic layout and large tuning knob insure safe mobile operation. And look at the receive coverage: 0.1-56, 76-108, 118-164 and 420-470 MHz The front panel is removable and it is remotable with the optional YSK-857 separation kit. Refinements include: spectrum display, 32 color display, beacon mode, keyer, 200 alphanumeric memories and CTCSS.

The FT-857D rear panel features an SO239 input for your HF/6M antenna, and an SO-239 input for your 2M/440 MHz antenna. Includes MH31A8J hand mic, mounting bracket, DC power cord, spare ATC fuses. The optional YSK-857 allows remoting the head.

Yaesu FT-897D

Yaesu FT-897D

The FT-897D is a rugged, innovative, multiband, multimode portable transceiver for the amateur radio MF/HF/VHF/UHF bands. Providing coverage of the 160-10 meter bands plus the 6 m, 2 m, and 70 cm bands, the FT-897 includes operation on the SSB, CW, AM, FM, and Digital modes, and it’s capable of 20-Watt portable operation using internal batteries, or up to 100 Watts when using an external 13.8-volt DC power source.

Power Output: 100 watts HF-6M, 50 watts 2 M, 20 watts 70 cm. (20 watts on battery)

Icom SM 50 Desk Microphone

SM-50

 

 

 

The Icom SM-50 is a unidirectional, dynamic microphone designed for base station operation with select Icom transceivers. (It cannot be used with non-Icom transceivers since the power is supplied from the connected transceiver). The SM-50 features Up-Down tuning (on compatible ICOM transceivers). There is a switch for PTT (push to talk) and also a lock feature. There is also a Low Cut Switch on the top of the base to cut out the low frequency components on input voice signals.

On the bottom of the mic base there is a gain adjustment. This mic is powered from the Icom transceiver. The mic cables terminate to a standard Icom 8 pin mic plug. This mic works with several Icom transceivers including the IC-7600.

Specifications
Microphone Element: Dynamic
Sensitivity: -30 dB ± 4dB (1 kHz, 0 dB = 1 V/1 Pa)
Impedance: 55 Ohms ± 30% (at 1 kHz)
Power requirement: 5-10 VDC (supplied from radio)
Weight: 26 oz. (730g).
Cable length: 39 inches (1m)

MFJ 259B

ANALYZER
ANALYZER

SWR ANALYZER, HF/VHF

Spesifikasi :
The MFJ-259B SWR analyzer features a built-in 10 digit
high-contrast LCD frequency counter. Reading your
antennas SWR and finding its resonance has never
been easier. All you do is connect your antenna, set
your SWR analyzer to the frequency you want and
read your SWR.MFJ-259B gives you a complete
pictures of your antenna’s performance. You can read
antenna SWR and Complex Impedance 1.8 to 170 MHz.
Read Complex Impedance as series resistance and
reactance (R+jX) or as magnitude (Z) and phase
(degrees). You can determine velocity factor, coax
cable loss in dB, length of coax and distance to a short
or open in feet. You can read SWR, return loss and
reflection coefficient at any frequency simultaneously at
a single glance. Also read inductance in UH and
capacitance in pF at RF frequencies. The large
easy-to-read two line LCD screen and side-by-side
meters clearly display your information. The built-in
frequency counter, Ni-Cad charger circuit, battery saver,
low battery warning and smooth reduction drive tuning
and much more. The MFJ-259B is easy to use! Just set
the bandswitch and tune the dial – just like you transceiver.
SWR and complex Impedance are displayed instantly!
The MFJ-259B is a complete ham radio test station
including — frequency counter, RF signal generator, SWR
Analyzer, RF resistance and Reactance Analyzer, Coax
Analyzer, Capacitance and Inductance Meter and more

VOXTER V 838

VOXTER V-838
HT VOXTER V 838

VHF 5 W Output Power
128 Groups of Memory Channels
25 KHz / 12.5 KHz Channel Spacing Compatible
Automatic Numbering Identification ( ANI ) Code
Built-in Voice Operate Transmit ( VOX )
All Channels Scan and Priority Channel Scan
Scrambler
Three Color LCD Backlight Adjustable
Emergency Alarm
Programmable by PC with Software
50 CTCSS and 104 DCS Normal / Inverted Selectable
Time – Out Timer ( TOT )
Busy Channel Lockout
2 Tone / 5 Tone Code ( Optional )
FM Radio Broadcasting Receiver